Macro Sensors LVDTs: LPC 2100 Signal Conditioner

产品介绍

The Macro Sensors LPC-2100 is a single channel signal conditioner that operates on AC line power to support any standard LVDT. Designed expressly for use in systems with PLCs and mini-PLCs, it offers the user a choice of three analog outputs: 0 to ±10 V DC, 0 to 10 V DC, or 4 to 20 mA (sourcing) current loop in a 3-wire grounded or 4-wire isolated configuration. Two versions are available, one operating from 115 V AC, 50-60 Hz power, and an export version operating from 220 V AC, 50-60 Hz. An LPC-2100's AC power input is fully isolated from its analog outputs, but to eliminate ground loops, the power line ground is not connected to the output signal's ground. To provide maximum output flexibility, the 4-20 mA current loop output does not track the voltage output.

The LPC-2100 is packaged in a DIN-rail mounting thermoplastic case with recessed screw-clamp terminals for all connections and front-panel-accessible span and zero adjustments. It uses a time-proven ASIC to produce a low distortion sine wave to excite the LVDT and a synchronous demodulator to convert the LVDT's AC output to more useful DC voltage proportional to core position. Additional circuitry regulates the DC power operating the ASIC and provides span and zero adjustability, a 2-pole low pass output filter, and the voltage-to-current conversion that drives the 4-20 mA current loop output.

Besides having an externally adjustable span control, the LPC-2100 also incorporates movable coarse gain jumpers which allow it to operate over an LVDT full scale output signal range greater than 50 to 1. The external zero control permits output offset adjustment from -100% to +100% of full scale output. The span and zero controls do not interact with each other. The LPC-2100 does not require a phase adjustment control, so it can work satisfactorily with reasonably long cables between it and the LVDT.

By shifting removable jumpers internally in the LPC-2100, a user can choose 3, 5, or 10 kHz nominal excitation frequencies at a level of 3 Volts rms for driving normal LVDTs, changeable to 1.5 Volts rms for operating LVDTs with low primary impedance. For multiple channel 应用领域, several LPC-2100 modules can be connected together in master/slave mode to synchronize their excitation oscillator frequency, thereby eliminating heterodyning, spurious beat frequency signals, cross talk, and intermodulation effects.

Besides having an externally adjustable Span control, the LPC-2100 also incorporates several coarse gain jumpers which allow it to operate over a maximum LVDT output signal range of 50 to 1. The external Zero control permits a zero offset from -100% to +100% of full scale output. The span and zero controls do not interact with each other. Because the LPC-2100 does not require a phase adjustment control, it can work satisfactorily with long cables between it and the LVDT.


click the image for an enlarged view 通用规格机械图及接线图订购资料 Instruction Manual 技术通报	产品介绍 The Macro Sensors LPC-2100 is a single channel signal conditioner that operates on AC line power to support any standard LVDT. Designed expressly for use in systems with PLCs and mini-PLCs, it offers the user a choice of three analog outputs: 0 to ±10 V DC, 0 to 10 V DC, or 4 to 20 mA (sourcing) current loop in a 3-wire grounded or 4-wire isolated configuration. Two versions are available, one operating from 115 V AC, 50-60 Hz power, and an export version operating from 220 V AC, 50-60 Hz. An LPC-2100's AC power input is fully isolated from its analog outputs, but to eliminate ground loops, the power line ground is not connected to the output signal's ground. To provide maximum output flexibility, the 4-20 mA current loop output does not track the voltage output. The LPC-2100 is packaged in a DIN-rail mounting thermoplastic case with recessed screw-clamp terminals for all connections and front-panel-accessible span and zero adjustments. It uses a time-proven ASIC to produce a low distortion sine wave to excite the LVDT and a synchronous demodulator to convert the LVDT's AC output to more useful DC voltage proportional to core position. Additional circuitry regulates the DC power operating the ASIC and provides span and zero adjustability, a 2-pole low pass output filter, and the voltage-to-current conversion that drives the 4-20 mA current loop output. Besides having an externally adjustable span control, the LPC-2100 also incorporates movable coarse gain jumpers which allow it to operate over an LVDT full scale output signal range greater than 50 to 1. The external zero control permits output offset adjustment from -100% to +100% of full scale output. The span and zero controls do not interact with each other. The LPC-2100 does not require a phase adjustment control, so it can work satisfactorily with reasonably long cables between it and the LVDT. By shifting removable jumpers internally in the LPC-2100, a user can choose 3, 5, or 10 kHz nominal excitation frequencies at a level of 3 Volts rms for driving normal LVDTs, changeable to 1.5 Volts rms for operating LVDTs with low primary impedance. For multiple channel 应用领域, several LPC-2100 modules can be connected together in master/slave mode to synchronize their excitation oscillator frequency, thereby eliminating heterodyning, spurious beat frequency signals, cross talk, and intermodulation effects. Besides having an externally adjustable Span control, the LPC-2100 also incorporates several coarse gain jumpers which allow it to operate over a maximum LVDT output signal range of 50 to 1. The external Zero control permits a zero offset from -100% to +100% of full scale output. The span and zero controls do not interact with each other. Because the LPC-2100 does not require a phase adjustment control, it can work satisfactorily with long cables between it and the LVDT.	特点 DIN-rail mountable DC voltage or current output Non-interactive adjustments No phase adjustment needed Supports all standard LVDTs User-Selectable 特点 0 to ±10 VDC, 0 to 10 VDC, or 4 to 20 mA output 1.5 or 3.0 Vrms LVDT excitation 3, 5, or 10 kHz excitation frequency Master/slave excitation synchronization